Need a part for this caliber? Supporters unlock the parts catalog, factory equivalents, and the donor finder that shows which other movements can supply the part you need.
Become a Supporter
Ronda 1315-21
Manual · 13.5‴ · Switzerland · 1970
Dimensions
30.45 mm
Height
4.50mm
Jewels
17
Power reserve
38h
Timegrapher
Beat rate
21,600bph
Frequency
3Hz
Reference: healthy amplitude ≈ 270–315° fully wound (>200° at 24 h); beat error ideally < 0.5 ms.
Movement
| Movement type |
Manual
Purely mechanical movements wound by hand via the crown, which tensions the mainspring to store energy. As the spring unwinds, it drives the gear train at a controlled rate set by the escapement and balance. Typical power reserves range from 38 to 80 hours, requiring daily or near-daily winding to keep the watch running.
|
|---|---|
| Winding type |
Stem Winding (Crown)
Winding the mainspring by turning the crown attached to the stem, transmitting torque through the winding pinion. Patented by Adrien Philippe in 1842, it replaced key winding and remains the standard manual winding method for both pocket watches and wristwatches.
|
| Setting type |
Stem Set (Crown Pull)
The dominant modern system: pulling the crown out to a setting position engages the hand-setting mechanism. Introduced in the late 19th century and refined into multi-position crowns (date, time, GMT). Used in virtually all modern wristwatches and most 20th-century pocket watches.
|
| Escapement type |
Pin Lever
Also known as the Roskopf escapement, this is a simplified, low-cost variant of the Swiss Lever using steel pins instead of jewelled pallet stones. Less accurate but inexpensive to produce, it democratized mechanical watchmaking in the 20th century, populating affordable alarm clocks and entry-level watches worldwide.
|
| Control type |
Balance Wheel
The heart of mechanical timepieces, the balance wheel is an oscillating component that, together with the hairspring, forms a harmonic oscillator regulating the gear train's pace. Its steady back-and-forth motion ensures the even release of energy from the mainspring, governing the watch's accuracy.
|
| Regulator type |
Pinned Regulator (or Index Regulator)
The most traditional regulator, consisting of a movable index pointer fitted with two curb pins (or a pin and a boot) that embrace the hairspring. Sliding the index along its scale changes the spring's active length, adjusting the rate. Simple, reliable, and easy to service, it remains the workhorse standard across countless mechanical movements.
|
| Shock protection |
KIF
A family of Swiss shock protection systems (Trior, Flector, Elastor, Duofix, Protechoc) produced by Parechoc SA, the main competitor to Incabloc. Uses a multi-point elastic spring design (typically three points in the Trior version) that excels in thinner calibres. Long favoured by Rolex (Duofix), Patek Philippe, and Audemars Piguet before each developed proprietary systems.
|
Specifications
| Lignes | 13.5‴ |
|---|---|
| Shape |
Round
It is the most common form that we can find.
|
| Complications |
Sweep Second
Contrary to the ticking motion of quartz watches, the sweep second hand in mechanical watches moves smoothly around the dial, offering a visual representation of time flowing continuously. This has become synonymous with the precision and craft of mechanical horology.
,
Date
An essential for many, the date display reminds wearers of their daily commitments, connecting the abstract concept of time to tangible daily events.
,
Moon Phase
This artistic complication connects wearers to celestial rhythms. Depicting the lunar cycle, it's both a technical marvel and an aesthetic feature, bridging earthly timekeeping with cosmic patterns.
|
| Hand count | 3 |
| Hand sizes | 1.80 x 1.30 x 0.20mm |
| Further measures | Nominal Diameter (Dn): 30.46mm |
Origin & References
| Manufacturer | Ronda AG |
|---|---|
| Country | Switzerland |
| Launch year | 1970 |
| COSC certified | No |
| Signature | ca. 1970: RL, 1217-21, Jura Watch Co, Swiss, 1 Jewel; Kif-Protechoc
(Ronda 1217-21, 12" , without day disc) |
Notes
Remarks: pin-lever escapement
in late samples glued hairspring terminal (cf. Ronda 1233-21)
stem mechanism without setting-lever spring
strange: train and hand gear separately driven by the barrel (cf. Ronda 9011)
Other data: balance staff: U3254 stem: W3215 mainspring / battery: Zf1051, 1.40 x 9.5 x 0.105 x 300mm
Ranfft mentioned about this caliber: There are variants with this quantity of jewels 1, 17
in late samples glued hairspring terminal (cf. Ronda 1233-21)
stem mechanism without setting-lever spring
strange: train and hand gear separately driven by the barrel (cf. Ronda 9011)
Other data: balance staff: U3254 stem: W3215 mainspring / battery: Zf1051, 1.40 x 9.5 x 0.105 x 300mm
Ranfft mentioned about this caliber: There are variants with this quantity of jewels 1, 17
Family
Series 1x11 - suffix -21
pin lever / Swiss lever:
1x11/1x31: manual, no second
1x13/1x33: manual, sweep second
1x15/1x35: manual, sweep second, date
1x16/1x36: auto, sweep second
1x17/1x37: manual, sweep second, day, date
1x18/1x38: auto, sweep second, date
1x19/1x39: auto, sweep second, day, date
1x21/1x41: manual, sweep second, digital display
1x23/1x43: manual, sweep second, alarm
1x26/1x46: auto, sweep second, digital display
1x66/1x86: auto, digital display incl. second
x=0: 10.5"
x=1: 11.5"
x=2: 12"
x=3: 13.5"
suffix -21: 21600A/h
Swiss-lever movements normally have the singature RAX under the balance, but some also RL like the pin levers.
Not all variants were actually made. Only those are listed, which are actually known or contained in current registers.
1x11/1x31: manual, no second
1x13/1x33: manual, sweep second
1x15/1x35: manual, sweep second, date
1x16/1x36: auto, sweep second
1x17/1x37: manual, sweep second, day, date
1x18/1x38: auto, sweep second, date
1x19/1x39: auto, sweep second, day, date
1x21/1x41: manual, sweep second, digital display
1x23/1x43: manual, sweep second, alarm
1x26/1x46: auto, sweep second, digital display
1x66/1x86: auto, digital display incl. second
x=0: 10.5"
x=1: 11.5"
x=2: 12"
x=3: 13.5"
suffix -21: 21600A/h
Swiss-lever movements normally have the singature RAX under the balance, but some also RL like the pin levers.
Not all variants were actually made. Only those are listed, which are actually known or contained in current registers.
Related calibers
Ronda 1011
Ronda 1013
Ronda 1013-21
Ronda 1015
Ronda 1015-21
Ronda 1017
Ronda 1017-21
Ronda 1021-21
Ronda 1031
Ronda 1033
Ronda 1033-21
Ronda 1035
Ronda 1035-21
Ronda 1037
Ronda 1037-21
Ronda 1041-21
Ronda 1111
Ronda 1113
Ronda 1113-21
Ronda 1115
Ronda 1115-21
Ronda 1117
Ronda 1117-21
Ronda 1131
Ronda 1133
Ronda 1133-21
Ronda 1135
Ronda 1135-21
Ronda 1137
Ronda 1137-21
Ronda 1211
Ronda 1213
Ronda 1213-21
Ronda 1215
Ronda 1215-21
Ronda 1216
Ronda 1216-21
Ronda 1217
Ronda 1217-21
Ronda 1218
Ronda 1218-21
Ronda 1219
Ronda 1219-21
Ronda 1221-21
Ronda 1223
Ronda 1223-21
Ronda 1226-21
Ronda 1231
Ronda 1233
Ronda 1233-21
Ronda 1235
Ronda 1235-21
Ronda 1236-21
Ronda 1237
Ronda 1237-21
Ronda 1238-21
Ronda 1239-21
Ronda 1241-21
Ronda 1243-21
Ronda 1246-21
Ronda 1286-21
Ronda 1311
Ronda 1313
Ronda 1313-21
Ronda 1315
Ronda 1315-21
Ronda 1317
Ronda 1317-21