Need a part for this caliber? Supporters unlock the parts catalog, factory equivalents, and the donor finder that shows which other movements can supply the part you need.
Become a Supporter
Parrenin 16"
Manual · 16‴ · France · 1925
Dimensions
36.1 mm
Height
6.20mm
Jewels
10
Power reserve
30h
Timegrapher
Beat rate
18,000bph
Frequency
2.5Hz
Reference: healthy amplitude ≈ 270–315° fully wound (>200° at 24 h); beat error ideally < 0.5 ms.
Movement
| Movement type |
Manual
Purely mechanical movements wound by hand via the crown, which tensions the mainspring to store energy. As the spring unwinds, it drives the gear train at a controlled rate set by the escapement and balance. Typical power reserves range from 38 to 80 hours, requiring daily or near-daily winding to keep the watch running.
|
|---|---|
| Winding type |
Stem Winding (Crown)
Winding the mainspring by turning the crown attached to the stem, transmitting torque through the winding pinion. Patented by Adrien Philippe in 1842, it replaced key winding and remains the standard manual winding method for both pocket watches and wristwatches.
|
| Setting type |
Pin Set (Pin-Push)
A small pin or button next to the crown is depressed to engage the setting mechanism while the crown is turned. A transitional system between key set and modern stem set, common in pocket watches from the 1860s to early 20th century and in some lower-cost wristwatches.
|
| Escapement type |
Cylinder
Invented by Thomas Tompion and perfected by George Graham around 1726, the cylinder escapement uses a slotted hollow cylinder on the balance staff that engages directly with the escape wheel teeth. Common throughout the 18th and 19th centuries, it offered flatter calibres but suffered from friction and wear.
|
| Control type |
Balance Wheel
The heart of mechanical timepieces, the balance wheel is an oscillating component that, together with the hairspring, forms a harmonic oscillator regulating the gear train's pace. Its steady back-and-forth motion ensures the even release of energy from the mainspring, governing the watch's accuracy.
|
| Regulator type |
Pinned Regulator (or Index Regulator)
The most traditional regulator, consisting of a movable index pointer fitted with two curb pins (or a pin and a boot) that embrace the hairspring. Sliding the index along its scale changes the spring's active length, adjusting the rate. Simple, reliable, and easy to service, it remains the workhorse standard across countless mechanical movements.
|
Specifications
| Lignes | 16‴ |
|---|---|
| Shape |
Round
It is the most common form that we can find.
|
| Complications |
Sub Second
A small seconds hand typically located on a sub-dial and is separate from the central hour and minute hands. Originating from early pocket watches where the main balance wheel drove the seconds hand, it offers an elegant way to track the passage of time without crowding the main display. It remains a testimony to the watch's mechanical precision and history.
|
| Hand count | 3 |
| Hand sizes | 2.10 x 1.00 / 0.21mm |
| Further measures | Mounting Diameter (Dm): 35.55mm Stem height (T): 2.6mm Mounting Height (F): 0.8mm |
Origin & References
| Manufacturer | Parrenin |
|---|---|
| Country | France |
| Launch year | 1925 |
| COSC certified | No |
| Signature | ca. 1925: - |
Notes
Remarks: open face calibre
cylinder escapement
cylinder escapement